|
We are Manufacturing and Exporting wide range of
Galvanized Steel Pipes & Steel Tubes for various purposes. Apart from
the following standard range of products we also manufacture customized
products as per the requirement of the buyers.
» Steel Pipes manufactured as per ASTM specification.
» Manufactures galvanized hollow sections.
» Leading manufacturers of manipulated tubes.
We have a large scale
unit engaged in manufacturing and exporting galvanized steel tubes /
pipes and welded black pipes/tubes and Electro galvanized Steel
tubes/pipes. We manufacture steel tubes for a range of applications like
Mild Steel tubes for structural purpose and mechanical & general
engineering purpose, ERW Pipes for water, gas & sewerage, Steel tubes
for idlers of belt conveyors, water wells and Lancing Pipes for various
automotive & industrial applications.
Our range of galvanized steel pipes and tubes are covered by a
layer of zinc & are used for varied applications. These are available in
various size and shapes based on the customers requirements. These tubes
are natural corrosion resistant and hold functional durability, even in
outdoor environments. Apart from preventing water corrosion, it is
equally effective in dry, indoor environments.
Indian Standards
1. Indian Standards: Specification
IS: 1239 (Part-I) 1990 (Light, Medium & Heavy
Series) Black & galvanized, plain end screwed and socketed
up to 100 mm NB all
series, 125 & 150 mm NB.
2. Indian Standards: Specification IS: 1978-1982
up to 200 mm NB grade & YST - 170 and YST - 210.
3. Indian Standards: Specification IS:
1161-1998 up to 150 mm NB grade & YST - 210 and YST - 240.
4. Indian Standards: Specification IS:
3601-1984 up to 168.3 mm OD and 7.1 mm wall thickness.
5. Indian Standards: Specification IS:
3589-1991 ERW Steel Tubes 150 mm to 400 mm NB.4.
6. Indian Standards: Specification IS:
4270-1992 ERW Steel Tubes for water wells up to 300 mm NB.
British Standards
1. British Standards: Specification
BS: 1387-1985 (Light, Medium & Heavy Series) black & galvanized, plain
end screwed and socketed
up to 100 mm NB all
series, 125 & 150 mm NB.
2.
British Standards: Specification BS: 1775-1964. Steel Tubes for
mechanical structural and general engineering purpose.
 |
Galvanized Steel Pipes and
Tubes |
Galvanized Steel Tubes For Ordinary Uses In Water, Gas, Steam
And Air Lines
Conforming To IS: 1239 (Part- I) 1990,
Equivalent Standard DIN-2439,2440 & 2441
|
|
Note :
1) IS : 1239 & BS : 1387 covers sizes upto sizes upto 100 mm NB all
series, 125 & 150 mm NB medium & heavy series, Plain end & Srewed
and Socketed ends.
2) IS : 1161 covers all sizes Plain End Only.
3) IS : 1161 O.D. Tolerance will be as per dimension tolerance
table, above table min / max. O.D. applicable for IS : 1239 only.
4) Hydro test Pressure - 5 MPa ( IS : 1161 Hydro Test not Required
) |
 |
For use in Water Gas, Steam and
Air Lines
Our range of galvanized steel
tubes are covered by a layer of zinc & are used for varied
applications. These are available in various size and shapes
based on the customers requirements. These tubes are natural
corrosion resistant and hold functional durability, even in
outdoor environments. Apart from preventing water corrosion, it
is equally effective in dry, indoor environments.
What are Galvanized Pipes and Tubes?
Galvanized pipes are steel pipes covered with
a protective coating of zinc that greatly reduces its tendency to
corrode and extends its life expectancy.
What are Galvanized Pipes
mainly used for?
It may be used in residential
water supply lines, but not gas lines because natural gas causes the
zinc to flake off and clog the system.
It's not frequently used for water supply lines because the minerals
in the water react with the galvanizing material and form scale,
which builds up over time and will eventually clog the pipe.
Galvanized pipes were commonly used for water supply lines
many years ago, but over time many have filled with scale, which is
why some older homes suffer from low water pressure. Hard water
greatly reduces the life of steel pipe.
While it can be used for all piping inside a building, its most
popular use today is for handrails or for replacement of existing
pipe. Copper pipe and plastic are preferred for underground
installation.
Fittings for this type of pipe are of galvanized malleable (soft)
cast iron. They connect by screwing onto the threaded pipe, after
applying a small amount of pipe joint compound on the threads.
Larger diameter pipe is welded rather than threaded. Galvanized pipe
is cut either with a heavy-duty tube cutter or cutoff saw, or by
hacksaw
It is sold in the same standard 21-foot lengths. Connectors and
fittings are screwed onto the pipe, after applying a small amount of
pipe joint compound onto the pipe threads. It is cut either with a
heavy-duty tube cutter or cutoff saw, or by hacksaw.
|
First Point Web Design
Maintained By
First Point IT
Marketed By:
First
Point Creations
Galvanized
Pipes, Galvanized Pipes India, Galvanized Pipe
+91-11-41637397,
+91-11-29221350